Table of Contents
Advertisement
Troubleshooting
Problem
The unit does not work.
While talking using the
handset, sound cuts in and
out.
HNH200_for_US_en-CA_(en_en)_0426_ver.003.pdf
Cause/solution
R When the indicators do not light,
the AC adaptor is not connected
properly. Check the connections.
R When the indicators do not light
green, move the unit closer to the
hub.
R Registration may have been
canceled. Deregister the unit, then
re-register.
Deregister:
1
Unplug the AC adaptor, then
press and hold M
2
While pressing and holding
M
adaptor.
3
Keep pressing and holding
M
until STATUS indicator flashes
amber. Then release M
Re-register: Unplug the AC
adaptor, then perform from step 2,
Installation/Registering the range
repeater to the hub,page 12.
R The handsets is out of range.
Move the handset closer to this
unit.
15
Appendix
N.
N, re-connect the AC
N for about 10 seconds
N.
15
2016/04/26
13:54:35
Advertisement
Table of Contents
