Features; Unpacking - RIDGID R7000 Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS
 Chuck Capacity .....1/16 in. (1.6 mm) to 3/8 in. (10 mm)
 Input ....................... 120 V, 60 Hz, AC only, 6.5 Amperes
kNOW YOUR DRILL
See Figure 1, page 12.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting.Before
use of this product, familiarize yourself with all operating
features and safety rules.

UNPACkING

INSTRUCTIONS
Your drill has been shipped completely assembled.
 Carefully remove the tool from the box.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
 Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
 No Load Speed .......................................... 0-2,500/min.
 Net Weight ............................................. 3.6 lbs. (1.6 kg)
LEVEL AND BELT CLIP
Two convenient features provided on your drill are a level
and a belt clip. The level is recessed in the motor housing on
your drill. It can be used to keep drill bits level during both
horizontal and vertical drilling operations. The belt clip is
molded into the top of the motor housing on your drill.
LIGHTED PLUG
The lighted plug helps to easily identify live tools.
PACkING LIST
Drill
Tool Bag
Operator's Manual
WARNING:
If any parts are damaged or missing do not oper-
ate this tool until the parts are replaced. Use of this
product with damaged or missing parts could result
in serious personal injury.
WARNING:
This tool should never be connected to a power
supply when you are assembling parts, making
adjustments, cleaning, performing maintenance, or
when the tool is not in use. Disconnecting the tool
will prevent accidental starting that could cause
serious injury.
7 - English