Symbols; Features - RIDGID R86712 Operator's Manual

Sds-plus 18 v rotary hammer drill
Table of Contents

Advertisement

Available languages

Available languages

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye and Hearing Protection
Wet Conditions Alert
Recycle Symbol
V
Volts
min
Minutes
Direct Current
n o
No Load Speed
.../min
Per Minute

FEATURES

PRODUCT SPECIFICATIONS
Impact Energy ......................................................1.5 ft-lbs.
No Load Speed .....................................0-1,400/min (RPM)
MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1 as well as hearing protection.
Do not expose battery, battery compartment, or electronic com-
ponents to rain, water, or liquids. Do not charge battery or expose
product to rain or damp locations.
This product uses lithium-ion (Li-ion) batteries. Local, state or
federal laws may prohibit disposal of batteries in ordinary trash.
Consult your local waste authority for information regarding avail-
able recycling and/or disposal options.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
4 – English
DESIGNATION/EXPLANATION
Blows Per Minute (BPM) .......................0-5,000/min (BPM)
Chuck Capacity ....................................................SDS-Plus

Advertisement

Table of Contents
loading

Table of Contents