RIDGID R7111 Operator's Manual

RIDGID R7111 Operator's Manual

1/2 in. drill double insulated
Hide thumbs Also See for R7111:

Advertisement

Your drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
1/2 in. DRILL
DOUBLE INSULATED
R7111
1

Advertisement

Table of Contents
loading

Summary of Contents for RIDGID R7111

  • Page 1 Your drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS  Introduction ... 2  General Safety Rules ...3-4  Specific Safety Rules ... 4  Symbols ...5-6  Electrical ... 7  Features ... 8  Assembly ... 9  Operation ...9-12  Maintenance ...13-14  Accessories ... 14 ...
  • Page 3: General Safety Rules

    GENERAL SAFETY RULES WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
  • Page 4: Specific Safety Rules

    GENERAL SAFETY RULES SERVICE  Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. WARNING! To reduce the risk of injury, user must read instruction manual.
  • Page 5: Symbols

    SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Volts Amperes Hertz Watt Minutes Alternating Current Direct Current...
  • Page 6: Symbols

    To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call RIDGID customer service for assistance.
  • Page 7: Electrical

    ELECTRICAL DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protect- ing insulation. Double insulated tools do not need to be grounded.
  • Page 8: Features

    AUXILIARY HANDLE ASSEMBLY Your drill is equipped with an auxiliary handle assembly. For ease of operation, you may use the handle with either the left hand or the right hand.
  • Page 9: Assembly

     Drilling in metals  Mixing paint SWITCH TRIGGER See Figure 2. To turn the drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced.
  • Page 10  Open or close the chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of the drill slightly to keep the bit from falling out of the chuck jaws.
  • Page 11  Release the lock-on button and the drill will continue running.  To release the lock, depress and release the switch trigger. If the lock-on feature is engaged during use and the drill becomes disconnected from the power supply, disengage the lock-on feature immediately. TO TIGHTEN...
  • Page 12  Plug the drill into power supply source.  Hold the drill firmly and place the bit at the point to be drilled.  Depress the switch trigger to start the drill. Do not lock the switch ON for jobs where the drill may need to be stopped suddenly.
  • Page 13: Maintenance

    MAINTENANCE WARNING: When servicing use only identical RIDGID replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust.
  • Page 14: Accessories

    Also, the chuck screw may become loose, caus- ing the chuck jaws to bind and prevent them from closing. To tighten:  Unplug the drill.  Open the chuck jaws. ACCESSORIES Look for these accessories where you purchased this product: ...
  • Page 15: Warranty

    Tools covers all defects in workmanship or materials and normal wear items such as brushes, chucks, motors, switch- es, cords, gears and even cordless batteries in this RIDGID tool for three years following the purchase date of the tool. Warranties for other RIDGID products may vary.
  • Page 16: Customer Service Information

    R7111 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

Table of Contents