Saeco Royal PLUS Operation And Maintenance Manual page 71

After emptying it put the drip tray back into place.
Select "OK" and press the "OK" button.
PLACE A CONTAINER
UNDER ALL
THE SPOUTS
OK
Place a large container under the dispensing spouts
(hot water and coffee).
Select "OK" and press the "OK" button.
STEP 1/2
Descaling
The first descaling phase starts. Press the "OK" button
to pause the operation. Press the "OK" button again
to resume the operation. When the solution in the
tank is finished, the machine requests to empty and
rinse the tank with fresh drinking water.
RINSE TANK
& FILL IT
WITH FRESH WATER
OK
Rinse the water tank thoroughly and fill it with fresh
drinking water up to the MAX level. Press the "OK"
button.
EMPTY
THE DRIP
TRAY
OK
Remove and empty the drip tray. After emptying it put
the drip tray back into place. Press the "OK" button.
PLACE A CONTAINER
Exit
Place a large container under the dispensing spouts
(hot water and coffee). Press the "OK" button.
Press the "OK" button to pause the operation. Press
the "OK" button again to resume the operation.
yes
Re-insert the small white filter or water filter based on
how you have chosen to proceed. Then, select "YES"
or "NO" based on the choice made and press "OK".
Fill the water tank again up to the MAX level with
fresh drinking water.
If you were using the
machine with the water
mains set to "ON", select
"NO" and put the red
closing cap back into place
in the tank.
UNDER ALL
THE SPOUTS
OK
STEP 2/2
RINSING
ACTIVATE
FILTER?
English
no
71