Saeco Royal PLUS Operation And Maintenance Manual page 65

Remove the rubber fitting.
Remove the milk and steam inlet fitting.
Remove the rubber lid as shown in the figure.
Wash the parts under running water. Make sure any
milk deposits/residues are removed.
After washing, reassemble the parts following the same
procedure used for disassembly, but in reverse order.
After washing
reassembling
Cappuccinatore, it can be
installed
machine.
and
the
back in the
Pannarello Thorough Cleaning
Monthly proceed with a thorough cleaning of all
Pannarello components. The steps below show how
to remove the Pannarello.
Remove the Pannarello outer part.
Pull out the Pannarello upper part from the steam/hot
water wand.
Wash the parts under running water. Make sure any
milk deposits/residues are removed.
Clean the Pannarello steam/hot water wand with a
damp cloth to remove any milk residues.
After washing, reassemble the parts following the same
procedure used for disassembly, but in reverse order.
After washing
reassembling
Pannarello,
installed
machine.
English
and
the
it can be
back in the
65