Saeco Royal PLUS Operation And Maintenance Manual page 69

At the end of the cycle,
after performing the rinse
cycle, the machine goes
back to
operating mode.
It is recommended
remove the group and wash
it under fresh running water.
Ensure that the brew group
is completely dry before
putting it back into the
machine.
10.2.8 Brew group lubrication
Lubricate the brew group after approximately 500 cups
of coffee or once a month. The grease for lubricating
the coffee unit and the relative accessories can be
purchased from your local dealer or the authorised
support centres.
To see how many coffees
have been dispensed, see
the "PRODUCTS" menu
in the "STATISTICS" menu
of the tech. menu (see
section "Description
messages
programming menu").
Before lubricating the brew group, clean it under
running water as described in the "Brew Group
Cleaning" chapter.
its normal
to
of
in the
Lubricate the brew group guides using Saeco grease only.
Apply the grease evenly on both side guides.
Lubricate the shaft too.
English
69