Table of Contents
Advertisement
Basic settings
You can set up your device according to your needs.
Overview of the basic settings
The basic settings depend on the equipment of your appliance.
Basic setting
Water hardness
rinse aid
lilac
Intensive drying
hot water
WiFi
Factory setting (may differ depending on the device type)
1
Display text
Choise
H04
H00 - H07
1
r05
r00 - r06
1
d00
d00 - d01
1
A00
A00 - A01
1
Cn0
Cn0 - Cn1
1
Basic settings NL
Description
Set the water softener to the water
hardness.
→
"Setting water softening",
Page 24
At position H00 the water
softening is switched off.
Set the amount of rinse aid.
→ "Amount of rinse aid
set", page 27
Switch off the rinse aid
with position r00.
During the final rinse, the temperature
is increased, which results in better
drying results. As a result, the run time
may increase slightly.
Remark: Not suitable for
delicate items of crockery.
Switch on intensive drying "d01"
or switch off "d00".
Set cold water connection or hot
water connection. Only set the
device to Hot water if the hot water
is prepared in an energetically
favorable way and a suitable
installation is available, eg a solar
boiler with circulation pipe. The
water temperature must be a
minimum of 40 °C and a maximum
of 60 °C. Switch on hot water "A01"
or switch off "A00".
Enable or disable wireless network
connection.
The "Cn0" position disables the
wireless network connection.
35
Advertisement
Table of Contents
