Safe Installation - Bosch SMU4HBS48E User Manual

Safe installation

Observe the safety instructions when installing the device.
WARNING ‒ Risk of injury!
Improper installations can cause injury.
▶ When setting up and connecting the device, follow the
instructions in the operating and installation instructions.
WARNING ‒ Risk of electric shock!
s Improper installations are dangerous.
▶ Only connect and use the device in accordance with the
information on the type plate.
▶ Only connect the device to a mains supply with alternating
current via a properly installed earthing socket.
▶ The protective earth system of the electrical house installation must
be installed in accordance with the electrical engineering
regulations.
▶ Never power the device via an external switching device,
e.g. a time switch or remote control.
▶ When the device is installed, the mains plug of the mains
connection cable must be freely accessible, or if free access is
not possible, an all-pole disconnecting device must be
installed in the permanently installed electrical system in
accordance with the installation instructions.
▶ When setting up the device, make sure that the mains
cable is not pinched or damaged.
s Cutting the supply hose or submerging the AquaStop valve in
water is dangerous.
▶ Never immerse the plastic housing in water. An electric
valve is located in the plastic housing on the supply hose.
▶ Never cut the supply hose. Electrical connection lines are
located in the supply hose.
Safety NL
5