NAD C325BEE Owner's Manual page 8

7 CD PLAYER CONTROL - (for use with NAD CD-Player)
| | | | engages Pause
engages Stop
engages Play or toggles between Play and Pause or engages
Track skip; Press once to respectively go to the next track or to return
to start of current or previous track.
engages reverse Scan and Skip
engages forward Scan and Skip.
engages CD drawer Open/Close; Press once to open the CD
drawer then once again to close the CD drawer and start playback.
7 CASSETTE DECK CONTROL - (for use with single NAD Cassette Decks)
engages Forward Play.
Press to put cassette deck into record-pause, then press Play to
start recording.
Stops Play or Recording.
engages Rewind.
engages Fast Forward.
8 TAPE/TUNER-CD - The TAPE/TUNER - CD switch applies tape controls
to the transport keys when in the TAPE/TUNER position, and applies
CD controls to the transport keys when in the CD position.
9 DEV 1/DEV 2 - In some instances when one's audio system is without
a tape deck, the CD transport keys may be set to operate in either
position of the Tape/Tuner -CD switch (No.8).
The default setting for this remote control switch set to DEV 1. In this
position, the Tape/Tuner -CD switch allows for both tape and CD
control (No.7). If one sets this switch to DEV 2, then the transport
keys will remain as CD control keys regardless of the position of the
Tap/Tuner -CD switch.
NOTES: The remote control handset supplied with the C325BEE is of a
universal NAD type, designed to operate several NAD models. Some
buttons on this handset are inoperative as the functions aren't
supported by the C325BEE. The Video 2 and Video 3 input selector
buttons (inside section No.2) on the remote control handset are
inoperative in the case of the C325BEE.
Direct sunlight or very bright ambient lighting may affect the
operating range and angle for the remote control handset.
8
7
5
1
2
3
8
4
5
6
7
9