Assigning Functions To Controllers (Assign) - Roland Aerophone Pro Owner's Manual

Assigning Functions to Controllers (ASSIGN)

You can assign functions to controllers such as the buttons and the thumb lever, and specify how the functions are controlled.
& For a list of the functions that you can assign, refer to "Aerophone Pro Parameter Guide" (PDF).
* The Assign parameters operate if the scene setting Assign Source is set to "System. " If Assign Source is set to "Scene, " each scene's assignment
settings are used (p. 14).
1. Press the [MENU] button.
The Menu screen appears.
2. Long-press a [–][+] (C/A) button to select an "Assign" parameter.
MEMO
If you long–press a [–][+] (C/A) button, the menu type switches between System, Scene, Assign, and MIDI.
3. Press the [MENU] button.
The cursor position moves to the lower line.
4. Use the [–][+] (C/A) buttons to specify the upper/lower limits in which a continuously-operated controller will
function, or the values when a switch-type controller is pressed/released.
MEMO
You can long-press the [MENU] button to move to the USER/FAVORITE registration screen.
Assigning a continuously-variable controller
For breath (the strength of your breath), bite (the strength at which you bite the reed), thumb lever, and thumb pads, specify the following
parameters.
* Indications of "***" in the table will contain the following names.
Breath_1, Breath_2, Breath_3, Breath_4, Breath_5, Breath_6, Breath_7, Breath_8, BiteDn_1, BiteDn_2, BiteDn_3, BiteDn_4, BiteUp_1, BiteUp_2,
BiteUp_3, BiteUp_4, WheelDn_1, LeverDn_2, LeverUp_1, LeverUp_2, Pad_1, Pad_2, Pad_3, Pad_4
Parameter
Indication
Assign Function *** Func
Input Min Value *** In Min
Input Max Value
*** In Max
Output Min Value
*** Out Min
Output Max Value *** Out Max
Mode *** Mode
Explanation
Value
& "Aerophone Pro Editor
Specify the function that is assigned to a continuously-operated controller.
Parameter Guide" (PDF)
Specify the minimum value (Min) and maximum value (Max) in which
controller operations are effective.
–
0 127
& "Function assignment (continuous operation)" (p. 16)
Specify the minimum value (Min) and maximum value (Max) in which the
assigned function operates.
–
0 127
& "Function assignment (continuous operation)" (p. 16)
Specifies the operation mode.
Momentary
Momentary, Latch
Latch
Making Settings in the Menu
The function operates like a graph (p. 16), according to
how you operate the controller.
Each operation switches between Output Min Value and
Output Max Value.
The switch occurs at the mid-point value between Input
Min Value and Input Max Value.
15