Grizzly G0561 Owner's Manual page 36

5. Loosen hex nuts shown in Figure 50, then
tighten hex bolts to push motor toward spin-
dle pulley and slacken V-belt.
— If belt is cracked, frayed, or worn, remove
it, then install a new belt.
x 2
Figure 50. Belt tension fasteners.
6.
Position V-belt on pulleys for desired FPM
(see Figure 51).
90
135
195
Motor Pulley
Figure 51. Illustration of V-belt placement for
FPM selection.
7. Loosen hex bolts from Step 5.
-34-
255
Wheel Pulley
8. Adjust motor position until there is approxi-
mately ⁄ " belt deflection when moderate
1
4
pressure is applied between pulleys (see
Figure 52).
Pulley
Pulley
Figure 52. Checking belt deflection.
9. Tighten hex bolts in Figure 53, then tighten
hex nuts against motor mount to secure.
x 2
Figure 53. Location of motor mount hex bolts.
10. Close pulley cover.
Model G0561 (Mfd. Since 01/18)
⁄ "
1
4
Deflection
x 2