Fuse Holder Assembly - Agilent Technologies TwisTorr Medium-TMP Rack User Manual

Technical Information

Fuse Holder Assembly

The following figure shows the location of this assembly.
Figure 30 Rear panel
Proceed as follows to replace one or both fuses:
1 Remove the fuse holders (position A) with a small screwdriver.
2 Replace the fuse.
3 Use only T-type fuses of the following characteristics:
- 250 Vac 10 A (5x20 mm) High breaking capacity.
Agilent TwisTorr Medium-TMP Rack Controller User Manual
A
151