Page 1
® FaxFinder V.34 Fax Server Configuration Guide for Inter-Operation with Altigen AltiServ Phone Systems...
Page 2
PN S000418B, Version B Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
4. Write down the station port extension number (this document uses 200 as an example). 5. If using a FF200, FF420 or FF820, you may need to set up a hunt group so that AltiServ can route a fax call properly.
Page 4
FaxFinder Configuration Guide: Altigen AltiServe Phone Systems 2. Configure SMTP so that FaxFinder can send fax mail to mail server: 3. Configure Time Zone and Date/Time Format: 4. Configure the modem to receive a fax call Three important fields need your attention: •...
Page 5
FaxFinder Configuration Guide: Altigen AltiServe Phone Systems 5. Add users in Phone Book. FaxFinder will use Ext # to associate the Email Address to the user. Note that the Ext # is actually a fax DID/DNIS number from the AltiServ’s point of view. It is the DTMF stream AltiServ will generate and transmit to FaxFinder through the station port.
Page 6
FaxFinder client software. Please direct your questions regarding technical matters, product configuration, verification that the product is defective, etc., to our Technical Support Department at (800) 972-2439 or email Product support resources are available at the Multi-Tech web site: support@multitech.com www.multitech.com...