Table of Contents
Advertisement
Quick Links
Narrow-beam Photoelectric Sensor with Built-in Amplifier
E3Z-L
Small 2.5-mm-diameter Spot Ideal for
Detecting Small Workpieces
■ Tiny workpieces as little as 0.1 mm in diameter can be
detected with the 2.5-mm-dia. spot.
■ The narrow beam enables sensing from small slots or holes.
■ The small spot of light enables visual checking of sensing
spot position.
■ IP67 degree of protection, mutual interference prevention,
and EN standard compliance.
Be sure to read Safety Precautions on
page 4.
Ordering Information
Sensors
Sensing method
Narrow-beam reflective
* The following table shows the model numbers of e-CON Pre-wired Connectors that are available.
The Ratings and Specifications are the same as those for the E3Z-L61.
Cable length
0.3 m
0.5 m
2 m
Accessories (Order Separately)
Mounting Brackets
Sensor I/O Connectors
Downloaded from
Elcodis.com
electronic components distributor
Appearance
Connection method
Pre-wired
Connector (M8, 4pins)
Model
E3Z-L61-ECON 0.3M
E3Z-L61-ECON 0.5M
E3Z-L61-ECON 2M
http://www.ia.omron.com/
Sensing distance
NPN output
E3Z-L61
*
90±30 mm
E3Z-L66
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Infrared light
Model
PNP output
E3Z-L81
E3Z-L86
1
Advertisement
Table of Contents
Related Manuals for Omron E3Z-L
Summary of Contents for Omron E3Z-L
- Page 1 The Ratings and Specifications are the same as those for the E3Z-L61. Cable length Model 0.3 m E3Z-L61-ECON 0.3M 0.5 m E3Z-L61-ECON 0.5M E3Z-L61-ECON 2M Accessories (Order Separately) Mounting Brackets Sensor I/O Connectors http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com electronic components distributor...
-
Page 2: Ratings And Specifications
75 100 125 150 175 200 225 250 Distance X (mm) Distance (mm) Sensing object size (mm) Spot Diameter vs. Sensing Distance Differential Travel vs. Sensing Distance Distance (mm) Distance (mm) http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com electronic components distributor... -
Page 3: I/O Circuit Diagrams
Brown Power supply (+V) Blue E39-ECON@M White Black Blue Power supply (0 V) XS3F-M421-402-A Black Output E39-ECONW@M XS3F-M421-405-A XS3F-M422-402-A Note: Pin 2 is not used. XS3F-M422-405-A http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com electronic components distributor... -
Page 4: Safety Precautions
Connector: Model No.37104-3122-000FL Sumitomo 3M 15.6 * 4-dia. vinyl-insulated round cable with 3 conductors, Standard lengths: 0.3 m, 0.5 m, and 2 m Accessories (Order Separately) Mounting Brackets http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com electronic components distributor... -
Page 5: General Precautions
(2) Do not use the Sensor in environments where the cables may become immersed in oil or other liquids or where liquids may penetrate the Sensor. Doing so may result in damage from burning and fire, particularly if the liquid is flammable. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com... - Page 6 (Light may enter even if the Sensors are separated by Sensor Sensor more than the sensing distance.) θ θ Adjust the Lowering the sensitivity will generally help. sensitivity. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com electronic components distributor...
- Page 7 Repeated Bending other terminals. Normally, the Sensor cable should not be bent repeatedly. (For bending-resistant cable, see Attachment to Moving Parts page C-4.) http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com electronic components distributor...
- Page 8 The testing conditions of the standard cable and robot cable are different. Refer to the values in the above table to check bend-resistant performance under actual working conditions. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com electronic components distributor...
- Page 9 Note:1.To maintain the fiber characteristics, make sure that the lock is released before removing the fibers. 2. Lock and unlock the fibers at an ambient temperature of − 10 to 40°C. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com electronic components distributor...
- Page 10 Cleaning • Keep organic solvents away from the Sensor. Organic solvents will dissolve the surface. • Use a soft, dry cloth to clean the Sensor. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. Downloaded from Elcodis.com electronic components distributor...
- Page 11 Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specifi ed) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS.