Set The Security Code - Motorola L401 User Manual

The correct sequence of the 3 security PIN digits needs to
be detected before entering remote access mode. Random
digits detected prior to the correct 3 digits sequence are
ignored, and answering machine recording continues until
the complete PIN is detected. There is no system prompt to
enter the remote access code.
Press the following keys on your handset to carry out your
desired function after entering remote access mode.
Press... To...
1 Repeat message
2 Play/Stop message
3 Skip forward to the next message
4 Toggle Answer Off/Announce Only/
Announce and Record modes
7 Listen to the Main Menu (for Full Voice
prompts only)
0 Delete message
34
8.4.7

Set the security code

This is used to change the remote access PIN if necessary.
P ,
1. Press and to select
P ,
2. Press and to select
P
3. Press and enter the 3-digit security code.
P
4. Press to save.
ANSWER MACHINE
.
SECURITY CODE
.
Using your Answering Machine