To Set Pbx Access Code - Motorola O202 Manual

8.11

To set PBX Access Code

If the phone is connected to a switchboard, you may need to enter an PBX Access Code in
the dialling sequence to be able to connect to the outside line.
The PBX Access Code will be displayed at the beginning of a number on the screen. The
code can be up to 4 digits long.
The PBX Access Code will not be used when you dial the number manually (such as
when you are not dialling from the phonebook). This allows you to make calls to other
switchboard extensions.
1. Press Menu, scroll
2. Set Handset is highlighted. Press Select.
D
3. Scroll to PBX Access Code
U D
4. Scroll or to Off,
If you select Set Code, enter the switchboard access code e.g. 9 then press Save.
n
5. Press to return to standby mode.
34
D
to Settings and press Select.
and press Select.
On or Set Code then press Select.
Handset setting