To Set Light Timeout; To Switch Auto Talk On / Off; To Switch Key Beep On / Off; To Set Pbx Access Code - Motorola O2 Manual

8.8

To set light timeout

Set the duration of the backlight after the handset returns to standby screen.
1. Press Menu, scroll
Set Handset is highlighted. Press Select.
2.
D
3. Scroll to Light Timeout
U D
4. Scroll or
n
5. Press to return to standby mode.
8.9

To switch auto talk on / off

With Auto Talk switched on, you can answer a call just by lifting the handset
off the base or charger cradle. If switched off, you will have to press
answer a call.
1. Press Menu, scroll
Set Handset is highlighted. Press Select.
2.
D
3. Scroll to Auto Talk
U D
4. Scroll or
n
5. Press to return to standby mode.
8.10

To switch key beep on / off

When you press a button on the handset, you will hear a beep. You can switch
it on or off.
1. Press Menu, scroll
Set Handset is highlighted. Press Select.
2.
D
Key Beep
3. Scroll to
U D
4. Scroll or
n
5. Press to return to standby mode.
8.11

To set PBX Access Code

If the phone is connected to a switchboard, you may need to enter an PBX
Access Code in the dialing sequence to be able to connect to the outside line.
The PBX Access Code will be displayed at the beginning of a number on the
screen. The code can be up to 4 digits long.
The PBX Access Code will not be used when you dial the number manually
(such as when you are not dialing from the phonebook). This allows you to
make calls to other switchboard extensions.
Press Menu, scroll
1.
Set Handset is highlighted. Press Select.
2.
D
3. Scroll to PBX Access Code
U D
4. Scroll or
If you select Set
Save.
n
5. Press to return to standby mode.
Handset settings
D
to Settings and press Select.
and press Select.
to set the timeout period you want and press Select.
D
to Settings and press Select.
and press Select.
Off On then press Select.
to or
D
to Settings and press Select.
and press Select.
to Off or On then press Select.
D
Settings and press Select.
to
and press Select.
to Off, On Set Code
or
Code, enter the switchboard access code e.g. 9 then press
then press Select.
to
t
35