Driving In Reverse - GEM e2 2019 Owner's Manual

OPERATION

DRIVING IN REVERSE

Your vehicle comes with a reverse camera located on the rear-view mirror.
Operation of the camera is automatic and is activated when the vehicle's drive
mode switch is in the reverse position.
Follow these precautions when operating in reverse:
1. Always check for obstacles or people behind the vehicle. Always inspect left
and right fields of vision before backing.
2. Avoid backing downhill.
3. Back slowly.
4. Apply the brakes lightly for stopping.
5. Avoid turning at sharp angles.
6. Never accelerate suddenly.
DRIVING ON SLIPPERY SURFACES
Skidding or sliding can cause loss of control or overturn (if tires regain traction
unexpectedly). When operating on slippery surfaces, reduce speed and use
extra caution to reduce the chance of skidding or sliding out of control. Do not
Whenever driving on slippery surfaces such as wet or icy pavement or loose
gravel, follow these precautions:
1. Do not operate on excessively slippery surfaces.
2. Slow down before driving onto a slippery surface.
3. Avoid quick, sharp turns, when can cause skids.
4. Correct a skid by turning the steering wheel in the direction of the skid. Never
apply the brakes during a skid.
54
WARNING
operate on excessively slippery surfaces.