Direction Selector Switch; Electrical Components; Glove Box - GEM e2 2019 Owner's Manual

FEATURES AND CONTROLS

DIRECTION SELECTOR SWITCH

TIP
The malfunction light will illuminate after reversing direction if you press the
accelerator pedal before coming to a complete stop.
Always come to a complete stop before reversing
direction. To choose the forward option, push the top
q
of the switch . Push the bottom of the switch to
e
choose reverse operation . When the direction
w
selector is in the center position , the vehicle is in
neutral. The vehicle will not move if the accelerator is
depressed.
ZERO SPEED DETECTION FEATURE
To prevent the vehicle from rolling away while stopped, the electric motor will
resist vehicle motion if the accelerator pedal is released while the key is on, and
the vehicle starts moving.

GLOVE BOX

The glove box is equipped with a lock to protect items from theft or damage. Use
the accessory lock key to lock and unlock the glove box door. Turn the key 1/4
turn counter- clockwise to unlock the door.

ELECTRICAL COMPONENTS

NOTICE
Liquids can damage electrical components and the circuit board. Handle
liquids with care. Do not spray water directly into the upper or lower console.
Electrical wiring, circuit boards and
components are located under and
q
behind the upper and lower console .
25