Advertisement
Figure 16
1. 2-pin connector
(solenoid valve—traction
manifold-port SV
2.
Plug the 90° 2-socket connector of the kit wire
harness into the 2-pin connector of the solenoid
valve in port SV of the traction manifold
17).
g321607
2. 2-socket connector
(machine wire
harness—labeled
TRACTION
/
)
MOW
TRANSPORT
(Figure
1. Straight 2-socket
connector (kit wire
harness)
2. 2-pin connector
(coil—traction
manifold-port RV1)
3. 2-pin connector
(solenoid valve—traction
manifold-port SV)
3.
Plug the straight 2-socket connector of the kit
wire harness into the 2-pin connector of the coil
at port RV1 of the traction manifold
4.
Plug the 2-socket connector of the machine
wire harness labeled
into the 2-pin connector of the kit wire harness
(Figure
17).
Securing the Kit Wire Harness to
the Machine
1.
At the bottom of the machine, clip the MOC-LOC
fastener to the tube connecting port M7 of the
traction manifold to the right, front traction motor,
as shown in
Figure
9
Figure 17
4. 90°2-socket connector (kit
wire harness)
5. 2-socket connector
(machine wire
harness—labeled
TRACTION
/
MOW
TRANSPORT
6. 2-pin connector (kit wire
harness)
(Figure
/
TRACTION MOW
TRANSPORT
18.
g321640
)
17).
Advertisement
