Advertisement
1. Fuse (10 A)
Installing the Relay
1.
Plug the relay into the 5-socket connector of the
kit wire harness
1. Relay
2. 5-socket connector (kit
wire harness)
Figure 11
2. Fuse-block socket C5
(Figure
12).
Figure 12
3. Electrical plate
4. Push-in fastener
2.
Align the hole in the tab of the relay with the hole
in the electrical plate, and secure the relay to the
plate with a push-in fastener
5
Installing the Kit Wire
Harness to the Traction
Manifold
g321565
Parts needed for this procedure:
1
Traction-control valve
1
Coil
1
Coil nut
1
MOC-LOC fastener
1
Cable tie
Routing the Kit Wire Harness to
the Traction Manifold
1.
Route the 2-pin connector and the 2-socket
connectors along the platform wire harness and
through the hole in the right floor pan
1. Hole (right floor pan)
2. 2-pin connector and
2-socket connectors (kit
wire harness)
2.
Route the kit wire harness down and toward the
g321563
traction manifold
7
(Figure
12).
(Figure
Figure 13
3. Platform wire harness
(Figure
14).
13).
g321568
Advertisement
