Toro 140-5800 Installation Instructions Manual page 6

1. Spade connector (kit wire
harness)
Installing the Kit Wire Harness to
the Fuse Block
1. At the bottom of the fuse block, locate the wire
attached to socket C5 of the block and remove
the shrink-wrap insulator from the terminal
receptacle (Figure
Figure 9
2. 5-socket connector (kit
wire harness)
10).
g321566
1. Terminal receptacle
(options power
wire—fuse-block socket
C5)
2. Shrink-wrap insulator
2. Plug the spade connector of the kit wire harness
(Figure 10) into the terminal receptacle for the
options power wire (fuse-block socket C5).
3. Insert the fuse (10 A) into fuse-block socket C5
(Figure 11).
6
Figure 10
3. Spade connector (kit wire
harness)
g321564