Download Print this page
Regency ONRTSP4224 Instructions

Regency ONRTSP4224 Instructions

42” single pedestal return

Advertisement

Quick Links

42" Single Pedestal Return • ONRTSP4224 • INSTRUCTIONS
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
PED-H
PED-F
Parts :
TT-D: Return Top
(41" x 23.5" x 1")
Quantity: 1
PED-G: Ped Foot Bracket
(23.5"D)
Quantity: 1
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
CARTONS: TT4224, MP2412, PFF24
MP-F: Return Modesty
(25.5" x 12" x 1")
Quantity: 1
PED-H: Ped Top Bracket
(23.5"D)
Quantity: 1
Any problems or questions call Regency Office Furniture at 1-866-816-9822
MP-F
PED-G
PED-F: File File Pedestal
(15.5" x 23.5" x 25")
Quantity: 1
Figure 1:
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To
lock Cam, turn clockwise.
42" Single Pedestal Return
Page 1
TT-D

Advertisement

loading

Summary of Contents for Regency ONRTSP4224

  • Page 1 Remove all wrapping materials, including staples & packing straps before you start to assemble. Do not tighten all screws/bolts until completely assembled. Keep all hardware parts out of reach of children. Any problems or questions call Regency Office Furniture at 1-866-816-9822...
  • Page 2 STEP 1 : Pull out each drawer on the File File Pedestal(PED-F) and find the black tabs at the end of the suspension. Lift one side up and press the other side down and simultaneously pull the drawer out. This will unlock the drawer and release it. Repeat this for all drawers. drawers. Any problems or questions call Regency Office Furniture at 1-866-816-9822...
  • Page 3 Screws(M). Also, insert 2 Glides(I) into Ped Foot Bracket(PED-G). NOTE: Flange on Ped Foot Bracket should face toward your Cam Pin location from STEP 2. PED-G PED-G Flange PED-F PED-F Any problems or questions call Regency Office Furniture at 1-866-816-9822...
  • Page 4 Pedestal(PED-F) by inserting Cam Pins into Cam Locks. NOTE: Cam Pins on the File File Pedestal should face inward Lock Cams (Figure 1). for modesty attachment. PED-F PED-F Cam Pin Location MP-F Cam Pin Location PED-H PED-H Any problems or questions call Regency Office Furniture at 1-866-816-9822...
  • Page 5 Return Top(TT-D) to Desk Top with 2 Flat Brackets(F) using 4 Short Bolts(L) per bracket. Finish by concealing Cam Locks with Cam Caps(J). TT-D MP-F STEP 9 : For additional stability, attach Corner Brackets(N) to File File Pedestal(PED-F) and the Modesty(MP-F) with 6 Wood Screws(M) per Corner Bracket. Any problems or questions call Regency Office Furniture at 1-866-816-9822...