Advertisement
Quick Links
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
RD-F
RD-H
Parts :
RD-A: Desk Top
(75.75" x 23.5" x 1")
(75.75" x 23.5" x 1")
Quantity: 1
RD-E: Center Leg
(37" x 9.75" x 1")
(37" x 9.75" x 1")
Quantity: 1
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Reception Desk • ONRD7630 • INSTRUCTIONS
Reception Desk • ONRD7630 • INSTRUCTIONS
CARTONS: RD7630 (Box A + Box B)
RD-G
RD-L
RD-B: Transaction Top
(40.25" x 10" x 25")
Quantity: 1
RD-F: Transaction Leg
(36.75" x 29.5" x 1")
Quantity: 1
Any problems or questions call Regency Office Furniture at 1-866-816-9822
RD-B
RD-K
RD-E
RD-D
RD-C: Desk Leg
(24.5" x 23.5" x 1")
Quantity: 1
Quantity: 1
RD-G: Transaction Modesty
(37" x 38.25" x 1")
Quantity: 1
RD-A
RD-I
RD-D: Desk Modesty
(35.5" x 23.5" x 1")
Quantity: 1
Figure 1:
Cam Lock Assembly:
To open Cam, point arrow toward
Cam Pin hole. To lock Cam, turn
clockwise.
Parts List continued
on back.
Reception Desk
Page 1
RD-J
RD-C
Advertisement
Related Manuals for Regency ONRD7630
Summary of Contents for Regency ONRD7630
- Page 1 Remove all wrapping materials, including staples & packing straps before you start to assemble. Do not tighten all screws/bolts until completely assembled. Keep all hardware parts out of reach of children. Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 2 (76mm) Quantity: 18 Quantity: 8 Quantity: 6 NOTE : PRODUCT IS REVERSIBLE. ALL STEPS INCLUDE BOTH RIGHT AND LEFT ORIENTATIONS. Please examine all parts before assembly. Hardware placement is critical. Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 3 NOTE : PLACE TRANSACTION LEG ON A CLEAN, NON SCRATCH SURFACE. THIS PRODUCT IS BEST BUILT ON ITS SIDE. PLEASE HAVE A SECOND PERSON SUPPORT ALL PARTS AS THE RECEPTION DESK IS BEING ASSEMBLED. Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 4 STEP 4A: On Side A of the Center Leg(RD-E), insert 3 Fine Threaded Cam Pins(P). Attach 1 Transaction Top Bracket(RD-K) to the top of the Center Leg(RD-E) using 2 Long Bolts(S). Insert 2 Glides(V) into Center Foot Bracket(RD-L), then attach Center Foot Bracket(RD-L) to Center Leg(RD-E) using 2 Screw/Washers(X). Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 5 STEP 6 : Attach Desk Modesty(RD-D) to Center Leg(RD-E) by inserting Cam Pins into Cam locks. Cam Locks face interior of desk. Lock Cams (Figure 1). RD-D RD-D RD-E RD-E Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 6 Insert 2 Glides(V) into Desk Foot Bracket(RD-I), then attach Desk Foot Bracket to Desk Leg(RD-C) using 3 Screw/Washers(X). Finish by inserting 2 Fine Threaded Cam Pins(P) into Desk Leg(RD-C). Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 7 Transaction Top Brackets(RD-K) with 12 Short Bolts(T). attaching Corner Bracket(M) with 6 Wood Screws(Q). RD-A RD-E RD-B RD-K STEP 11B: Finish by attaching all Insert Covers(W) and Cam Caps(R) where necessary. Any problems or questions call Regency Office Furniture at 1-866-816-9822...