Installation; Connect Heated Hose; Connect Electrical Cable - Graco 249514 Operation And Parts Manual

Installation

Installation
NOTE: Only connect to a Graco supply system with a
Graco heated fluid hose. See Related Manuals on
page 2.

Connect Heated Hose

1. An adapter may be required to connect the gun to
some hose sizes. If required, secure adapter onto
gun swivel (a) and tighten securely.
Part Adapter
120264 -8 JIC x -10 JIC
- - - - - Not Required
120265 -10 JIC x -12 JIC
2. Securely connect hose to gun swivel (A).
A
3. Wrap connection with insulating cuff (B) (119889).
B
6

Connect Electrical Cable

1. Wrap hose cable around hose one time. Connect
Hose Size
-8
-10
-12
2. Place flat side of cable connection against hose.
3. Fasten Velcro insulation wrap (198422) snugly
electrical cable from hose to gun cable, engage
metal clip on top of connector.
Make sure the metal clip faces away from the hose.
This will prevent damage to the hose from the clip
rubbing against it.
around the hose. Secure wrap with two Velcro
straps (198442) on the ends of the wrap.
311209W