Xerox WorkCentre 4150 Service Manual page 299

6. Remove the Outer Cover from the Front Cover of the DADF
NOTE: The Outer Cover is press-fit onto to Front Cover, and requires only a slot-head
screwdriver to remove.
Front Cover
Outer Cover
Figure 4 Removing the Outer Cover from the Front Cover
Repairs and Adjustments
REP 5.32
(Figure 4).
1
Work a small slot-head screwdriver around
the perimeter of the Outer Cover, and sepa-
rate it from the Front Cover.
7. Open the DADF and remove the two Front Cover mounting screws
Figure 5 Removing the Front Cover Mounting Screws
January 2016
4-98 WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
(Figure 5).
1
Remove the two Front Cover
mounting screws.