Return Procedure; Disposal - Siemens SITRANS F Operating Instructions Manual

• Transmitter hardware version
• Display module hardware version
9.4

Return procedure

To return a product to Siemens, see Returns to Siemens
siemens).
Contact your Siemens representative to clarify if a product is repairable, and how to return it.
They can also help with quick repair processing, a repair cost estimate, or a repair report/cause
of failure report.
NOTICE
Decontamination
The product may have to be decontaminated before it is returned. Your Siemens contact
person will let you know for which products this is required.
See also
Decontamination declaration (https://www.siemens.com/sc/declarationofdecontamination)
9.5

Disposal

SITRANS FST020 IP65 (NEMA 4X)
Operating Instructions, 05/2022, A5E41425845-AC
Devices described in this manual should be recycled. They may not be dis‐
posed of in the municipal waste disposal services according to the Directive
2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC and UK, or to a locally
approved disposal service for eco-friendly recycling. Observe the specific
regulations valid in your country.
Further information about devices containing batteries can be found at:
Information about battery / product return (WEEE)
support.industry.siemens.com/cs/document/109479891/)
Service and maintenance
(www.siemens.com/returns-to-
(https://
9.5 Disposal
71