Configuring A New Device; Wizard - Quick Start Via Pdm - Siemens SITRANS F Operating Instructions Manual

SIMATIC PDM
C.1 Commissioning with SIMATIC PDM
C.1.7

Configuring a new device

Note
Configuring device via SIMATIC PDM
Clicking "Cancel" button during an upload from device to SIMATIC PDM will result in some
parameters being updated.
1. Check that you have the most recent EDD, and if necessary update it. See Updating the
Electronic Device Description (EDD) or Field Device Integration (FDI) (Page 103).
2. Launch SIMATIC Manager and create a new project for the device.
3. Open the menu "Device > Operation > Reset > Restore ordered configuration". Select "Yes"
button and click "OK" to perform a reset to customer ordered settings.
4. After the reset is complete click on "Upload to PG/PC..." to customer ordered settings.
5. Configure the device via the Quick Start wizard. (See Wizard - Quick Start via PDM (Page 108).)
C.1.8

Wizard - Quick Start via PDM

The graphic Quick Start Wizard provides an easy multistep procedure that configures the device
for a simple application.
Please consult the SIMATIC PDM operating instructions or online help for details on using
SIMATIC PDM.
Quick start
Note
• The Quick Start wizard settings are inter-related and changes apply only after you click on
Apply at the end of the wizard to transfer settings to the device.
• Do not use the Quick Start Wizard to modify individual parameters.
• Click on Back to return and revise settings or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open the menu Device → Wizards → Wizard - Quick Start..., and follow the
steps.
108
SITRANS FST020 IP65 (NEMA 4X)
Operating Instructions, 05/2022, A5E41425845-AC