Return Procedure; Replacing Electronics - Siemens SIPART PS100 Operating Instructions Manual

Improper connection after maintenance
Risk of explosion in areas subject to explosion hazard.
• Connect the device correctly after maintenance.
• Close the device after maintenance work.
Refer to Electrical connection (Page 33).
10.4

Return procedure

Enclose the bill of lading, return document and decontamination certificate in a clear plastic
pouch and attach it firmly to the outside of the packaging. Any devices/replacement parts which
are returned without a decontamination declaration will be cleaned at your expense before
further processing. For further details, refer to the operating instructions.
See also
Return document (http://www.siemens.com/processinstrumentation/returngoodsnote)
Decontamination declaration (http://www.siemens.com/sc/declarationofdecontamination)
10.5

Replacing electronics

Use of incorrect module cover in hazardous areas
Risk of explosion in hazardous areas. The metalized module cover, colored silver on the
inside, cannot be used in hazardous areas.
• Only use the non-metalized, transparent module cover for positioners in hazardous areas.
SIPART PS100
Operating Instructions, 06/2023, A5E50188938-AF
WARNING
WARNING
Service and maintenance
10.5 Replacing electronics
55