Table of Contents
Advertisement
http://getMANUAL.com
1-2. Control Panel
1-2-5. Installation and Removal of Boards
19. PS-403 Board
(1) Remove the exterior part of the AUX BUS panel. (Refer to the section 1-2-3.)
(2) Disconnect the two connectors (CN2 and CN3).
(3) Remove the six screws and the PS-403 board.
PSW3 x 8
PSW3 x 8
PSW3 x 8
CN2
PS-403 board
CN3
(4) Install the PS-403 board in the reverse order of the procedures (1) through (3).
1-47
DVS-7000AE MMP1
Advertisement
Table of Contents
Troubleshooting
