Table of Contents
Advertisement
1-2. Control Panel
1-2-5. Installation and Removal of Boards
18. LE-148 Board
(1) Open the panel. (Refer to the section 1-2-1.)
(2) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(3) Remove the KY-318A, 318C or 331 board.
(Refer to "6. KY-318A, 318B, 318C or 331 Board" in this section.)
(4) Remove the three screws securing the LE-148 board.
(5) Disconnect the one connector (CN5) on the KY-318A, 318C or 331 board and remove the LE-148
board.
KY-318A board
(6) Install the LE-148 board in the reverse order of the procedures (1) through (5).
1-46
P2.6 x 5
P2.6 x 5
P2.6 x 5
CN5
LE-148 board
DVS-7000AE MMP1
Advertisement
Table of Contents
Troubleshooting
