Table of Contents
Advertisement
1-2. Control Panel
1-2-5. Installation and Removal of Boards
15. LE-145 Board
(1) Remove the three knobs.
(2) Open the panel. (Refer to the section 1-2-1.)
(3) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(4) Remove the CPU-263 board. (Refer to "3. CPU-263 Board" in this section.)
(5) Remove the KY-320, 321, 322 or 367 board.
(Refer to "8. KY-320, 321, 322 or 367 Board" in this section.)
(6) Remove the two screws and the LE-145 board installing with the VR bracket.
(7) Remove the four screws and the LE-145 board from the VR bracket.
LE-145 board
B2.6 x 4
Knobs
VR bracket
B2.6 x 4
BVWH3 x 8
BVWH3 x 8
(8) Install the LE-145 board in the reverse order of the procedures (1) through (7).
1-43
DVS-7000AE MMP1
Advertisement
Table of Contents
Troubleshooting
