Table of Contents
Advertisement
1-2. Control Panel
1-2-5. Installation and Removal of Boards
7. KY-319A, 319B, 319C or 332 Board
(1) Open the panel. (Refer to the section 1-2-1.)
(2) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(3) Disconnect the four connectors (CN1 through CN4).
(4) Remove the six screws and the KY-319A, 319B, 319C or 332 board.
CN2
PSW3 x 8
PSW3 x 8
CN4
(5) Install the KY-319A, 319B, 319C or 332 board in the reverse order of the procedures (1) through (4).
n
When replacing the KY-319A, 319B or 319C board, be sure to select the switch S1.
(For selection details, refer to the section 5-1-2 in the installation manual.)
1-34
PSW3 x 8
CN3
PSW3 x 8
CN1
PSW3 x 8
PSW3 x 8
KY-319A board
DVS-7000AE MMP1
Advertisement
Table of Contents
Troubleshooting
