10. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove the two Screws (A). Next, lift off the
Crossbar (107). Discard the two Screws.
11. IMPORTANT: To avoid damaging the
Crossbar (107), do not use power tools and
do not overtighten the #10 x 3/4" Screws (4)
or the #10 x 3/4" Flat Head Screws (109).
Orient the Crossbar (107) as shown. Attach the
Crossbar to the Handrails (84, 85) with two #10
x 3/4" Flat Head Screws (109), two #10 x 3/4"
Screws (4), and two #10 Star Washers (12) as
shown. Start all four Screws, and then tighten
each of them.
All manuals and user guides at all-guides.com
11
10
107
11
4
109
12
84
Console
Assembly
A
107
109
4
12
85