Hob - Hints And Tips - AEG CKB6540ACM User Manual

6.2 Burner overview
6.3 Replacing burner parts
1. Put carefully the burner crown on the
burner body. Let the crown fall freely
onto the body. Do not use force.
Make sure that the hole in the crown
is above the ignition candle.
Make sure that the location pegs are
in the slots in the burner body.
Make sure that you can move the
crown a small distance from side to
side.
2. Put the burner cap centrally on top of
the crown.
Make sure that the cap is correctly
installed, with the enamel side up
and you can move the cap from side
to side and front to back.
3. Light the burner.
If the burner does not ignite, adjust the
crown and cap again.
6.4 Turning the burner off
To put the flame out, turn the knob to the
off position

7. HOB - HINTS AND TIPS

WARNING!
Refer to Safety chapters.
C
D
.
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
WARNING!
Always turn the flame down
or switch it off before you
remove the pans from the
burner.
6.5 Lid Safety Device
Lid has safety device, which cuts off the
gas supply for the hob. Closing the lid
activates the safety device.
WARNING!
Always use the knob for the
hob to switch off a burner.
Do not use the lid as a cut-
off device.
7.1 Cookware
WARNING!
Do not put the same pan on
two burners.
ENGLISH 15