ATEN CL5708IM User Manual page 252

CL5708I / CL5716I User Manual
(Continued from previous page.)
3. Slide the switch onto the support flanges. Use the screws supplied with
this package to loosely attach the front of the switch to the front of the rack
(only tighten the screws part way).
M4 x 6
Phillips Head Screw
4. Slide the rear attachment sliding brackets along the slide bars until they
contact the rear of the switch, then use the screws supplied with this
package to attach the bars to the rear of the switch (tighten the screws all
the way).
236
M4 x 6
Phillips Head Screw