ATEN CL5708IM User Manual page 151

IPv4 Settings
IP Address:
IPv4 is the traditional method of specifying IP addresses. The KVM
over IP switch can either have its IP address assigned dynamically
(DHCP), or it can be given a fixed IP address.
For dynamic IP address assignment, select the Obtain IP address
automatically [DHCP] radio button. (This is the default setting.)
To specify a fixed IP address, select the Set IP address manually
[Fixed IP] radio button and fill in the fields with values
appropriate for your network.
Note: 1. If you choose Obtain IP address automatically [DHCP],
when the switch starts up it waits to get its IP address from the
DHCP server. If it hasn't obtained the address after one
minute, it automatically reverts to its factory default IP
address (192.168.0.60.)
2. If the switch is on a network that uses DHCP to assign
network addresses, and you need to ascertain its IP address,
see IP Address Determination, page 219, for information./
DNS Server
For automatic DNS Server address assignment, select the Obtain
DNS Server address automatically radio button.
To specify the DNS Server address manually, select the Set DNS
server address manually radio button, and fill in the addresses for
the Preferred and Alternate DNS servers with values appropriate
for your network.
Note: Specifying the Alternate DNS Server address is optional.
Chapter 10. Device Management
135