Updating The Reactor Autopilot Remote Control Software; Yamaha Autopilot - Garmin ECHOMAP UHD2 6 SV Owner's Manual

Updating the Reactor Autopilot Remote Control Software

You can update the Reactor autopilot remote control software using the chartplotter.
1 Insert a memory card into the card slot on the computer.
2 Go to garmin.com/software/autopilot_remote_control, and select Software.
3 Select Download.
4 Read and agree to the terms.
5 Select Download.
6 Choose a location, and select Save.
7 Double-click the downloaded file.
8 Select Next.
9 Select the drive associated with the memory card, and select Next > Finish.
10 On the chartplotter, insert the memory card into the card slot.
11 Select Settings > Communications > Wireless Devices > Autopilot Remote > Update Software.

Yamaha Autopilot

WARNING
You can use the autopilot feature only at a station installed next to a helm, throttle, and helm control device.
You are responsible for the safe and prudent operation of your vessel. The autopilot is a tool that enhances your
capability to operate your boat. It does not relieve you of the responsibility of safely operating your boat. Avoid
navigational hazards and never leave the helm unattended.
Always be prepared to promptly regain manual control of your boat.
Learn to operate the autopilot on calm and hazard-free open water.
Use caution when operating the autopilot near hazards in the water, such as docks, pilings, and other boats.
The autopilot system continuously adjusts the steering of your boat to maintain a constant heading (heading
hold).
When the chartplotter is connected to a compatible Yamaha autopilot system, you can view the autopilot
information using the Yamaha autopilot screen and overlay bar. For information about compatible Yamaha
autopilot systems, contact your Yamaha dealer.
Autopilot 87