Setting The Device Name; Updating The Media Player Software; Device Configuration; System Settings - Garmin ECHOMAP UHD2 6 SV Owner's Manual

Setting Parental Controls on SiriusXM Radio Channels
Before you can set parental controls, the parental controls must be unlocked.
The parental control feature allows you to limit access to any SiriusXM channels, including those with mature
content. When enabled, the parental control feature requires you to enter a passcode to tune to the locked
channels.
Select Browse > Parental > Lock/Unlock.
A list of channels appears. A checkmark indicates a locked channel.
NOTE: When you view the channels after setting parental controls, the display changes:
• indicates a locked channel.
• indicates an unlocked channel.
Clearing All Locked Channels on a SiriusXM Radio
Before you can clear all locked channels, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Clear All Locked.
2 Enter your passcode.
Restoring Default Parental Control Settings Values
This process deletes all the settings information you have entered. When you restore the parental control
settings to their default values, the passcode value is reset to 0000.
1 From the media menu, select Installation > Factory Defaults.
2 Select Yes.
Changing a Parental Passcode on a SiriusXM Radio
Before you can change the passcode, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Change PIN.
2 Enter your passcode and select Done.
3 Enter a new passcode.
4 Confirm the new passcode.

Setting the Device Name

1 From the media screen, select
2 Enter a device name.
3 Select Select or Done.

Updating the Media Player Software

You can update the software on compatible connected stereos and accessories.
See the stereo Owner's Manual at

System Settings

Select Settings > System.
Sounds and Display: Adjusts the display settings and the audio settings (if available).
Satellite Positioning: Provides information about the GPS satellites and settings.
System Information: Provides information about the devices on the network and the software version.
Station Information: Adjusts the setup of the station.
Auto Power Up: Controls which devices turn on automatically when power is applied.
Auto Power Off: Automatically turns off the system after it has been asleep for the selected length of time.
Simulator: Turns the simulator on or off and allows you to set the time, date, speed, and simulated location.

Device Configuration

> Installation > Set Device Name.
support.garmin.com for instructions on updating the software.
Device Configuration
119