Gemü Conexo - GEM 1434 mPos Operating Instructions Manual

4 GEMÜ CONEXO
3.5 Product label
Design in accordance with
order data
1434000Z1A1430001010
Supply voltage
24V
Action/
single 15l/min
flow capability
12
Device version
88282795
Item number
Device version
▶ These instructions are valid for devices from device ver-
sion 10. It is possible to determine which firmware has
been used on the basis of the device version. For older
devices (device version older than 10), different operating
instructions with potentially different operating specifica-
tions are used.
Device Firmware version Effective
version
10 V2.0.0.0
11 V2.0.0.2
12 V2.0.0.4
GEMÜ 1434 µPos
Max. permiss. control pressure
(at max. ambient temperature)
PST max 8,0bar
Ambient
0-60° C
Iw:4-20mA
temperature
2019
Year of
manufacture
- 10524779 | 0001
Serial number
Batch number
NOTICE
Changes
from
09/2013
12/2013 Optimization of ini-
tialisation routine
for normally open
valves
12/2016 Optimization of ac-
tuation behaviour
of small-volume lin-
ear actuators with
low stroke
4 GEMÜ CONEXO
Order variant
In the corresponding design with CONEXO, this product has
an RFID chip (1) for electronic identification purposes. The po-
sition of the RFID chip can be seen below. The CONEXO pen
helps read out information stored in the RFID chips. The CON-
EXO app or CONEXO portal is required to view this informa-
tion.
For further information please read the operating instructions
for CONEXO products or the CONEXO datasheet.
Products such as the CONEXO app, the CONEXO portal and
the CONEXO pen are not included in the scope of delivery and
need to be ordered separately.
8 / 32
1
www.gemu-group.com