Table of Contents
Advertisement
Wi-Fi Connection Assistant
Wi-Fi Connection Assistant allows you to diagnose or repair the network status, and to perform printer
settings on network.
Use Wi-Fi Connection Assistant for:
• Searching printers on network and performing initial network setup for detected printers
• Performing initial network setup by connecting the printer and computer using a USB cable (Not
available for some models)
• Changing printer network settings
• Diagnosing the settings of the printer and those of computer on which Wi-Fi Connection Assistant is
installed if anything is wrong with connection. In addition, Wi-Fi Connection Assistant repairs the status
of the printer and computer (Not available for some models).
Important
• Depending on the printer you are using, an administrator password is already specified for the printer
•
at the time of purchase. When you change the network settings, authentication by the administrator
password is required.
For details:
Administrator Password
For improving security, we recommend to change the administrator password.
Change Administrator Password
• To use the printer over LAN, make sure you have the equipment necessary for the connection type,
such as a wireless router or a LAN cable.
• When you install Wi-Fi Connection Assistant, disable block function of firewall.
• Do not change network settings using Wi-Fi Connection Assistant while printing is in progress.
46
Advertisement
Table of Contents
