Table of Contents
Advertisement
If your security software's firewall is on, a message may appear warning you that Canon software is attempting to
access the network. If this warning message appears, set security software to always allow access.
If you are using any programs that switch between network environments, check their settings. Some programs
use a firewall by default.
If printer is connected to AirPort Base Station via LAN, make sure you use
Check2
alphanumeric characters for network name (SSID). (macOS)
If characters other than single-byte alphanumeric characters are used in the network name (SSID), you will not be
able to connect correctly. Change the network name (SSID) to single-byte alphanumeric characters only.
Solve network troubles with the printer's diagnostic functions.
Check3
See below.
Solve Network Troubles with The Printer's Diagnostic Functions
473
Advertisement
Table of Contents
