Check The Information For Wireless Connection; (Wi-Fi Protected Setup) - Canon Pixma MP560 Series Getting Started

• Check the Information for Wireless Connection
The following information is required to connect to your access point or router.
Check your access point or router for the following information, then write it down.
Access Point Name/Network Name: _
• Also referred to as SSID.
An identifier to identify the specific access point.
Network Key: _
* Also referred to as encryption key, WEP key or WPAlVVPA2 passphrase, Pre-Shared key.
A password required to set to prevent unauthorized access to communication.
Xou. Can' retri~)(~,your ne
key.by;;usiog'Jt1e'Can
'which
can',
b~do~n.I:QaB~ lJrth:elC~rl'~9"$9~f1d~
.' If
you are unab!e'to
retri~veth~
netwo'" ,"
>~rqth
;..-. ' , ' . ., :"' " .:<
~:>
' ;: - - ,.. ,. . .. . .
~
'"
,rquter, orcontast its rnanuf:ilcturer..
f __ ,_,._, •.,..
"1'
20
Wireless ConnecllOn
o If your access point or router
supports WPS (Wi-Fi Protected
Setup):
A wireless connection can be set up easily
without checking the information to the
left. Go to "Wireless Setup Using WPS
(Wi-Fi Protected Setup)" on page
24.
~-------
• If you are using Windows Vista operating
system and have a USB flash drive, you
can configure wireless connection settings
by
using the WCN (Windows Connect
Now) function as well. For details, refer
to'Wireless Setup Using WCN(Windows
Connect Now)" in "Reference Information"
on page 56.
I
I
•