Feed settings
Select this setting item from Settings.
Note
• By registering the paper size and the media type, the message can be displayed before printing starts
•
when the paper size or the media type of the loaded paper differs from the paper settings.
Paper Settings
•
• Rear tray paper settings
Registers the paper size and the media type you load on the rear tray.
• Check paper replacement
•
If you select Enable, the printer detects the paper replacement. A screen for confirming the setting of
paper is displayed.
Note
•
• A screen for confirming the setting of paper is not displayed if you select Disable. Set the size and
type of paper properly in Rear tray paper settings when making prints.
•
• For AirPrint of iOS/iPadOS, paper may be printed based on the paper size set during paper loading.
It is recommended to set to Enable when making prints using an AirPrint function.
• Detect paper setting mismatch
•
If you select Enable, the printer detects whether the paper size and the media type are identical
with those registered in Feed settings. If printing starts with the settings that do not match, an error
message is displayed on the LCD.
Note
• When Disable is selected, the settings in Feed settings is disabled.
•
206