Canon PIXMA G4572 Online Manual page 483

Hide thumbs Also See for PIXMA G4572:
Table of Contents

Advertisement

C-0
It is connected correctly. If, nevertheless, the printer is not found on the network or printing is not possible,
check the following items.
Note
• If codes other than "C-0" are displayed at the same time in the item "2-2" see also the
correspondence of the other codes.
Check that security software's firewall is off.
Check1
A message may appear warning you that Canon software is attempting to access the network. If this warning
message appears, set the security software to always allow access.
Quit the security software and make sure that the printer is recognized and ready to use. If so, the cause is
the firewall setting. Change the firewall settings so that the printer is recognized and ready to use. For details,
contact the manufacturer of the security software.
If you are using any programs that switch between network environments, check their settings. Some programs
use a firewall by default.
Does network name (SSID) of printer match network name (SSID) setting of
Check2
wireless router that communicates?
Check the "3-2-6" item in the printed network settings information and the network name (SSID) of the wireless
router you want to connect to. If they are not matched, check the SSID and password of the wireless router you
want to connect to, and then setup manually.
Is privacy separator, SSID separator, or Network separation function enabled
Check3
on wireless router?
If it is enabled, disable these functions before performing the setup. To check the settings of the wireless
router, refer to the instruction manual provided with it or contact its manufacturer.
If MP Drivers (Printer Driver) are not installed, install them. (Windows)
Check4
Install the MP Drivers (Printer Driver).
Set Up
C-1
The printer's Wi-Fi setting is disabled. (You can also check if the Wi-Fi icon
the printer's screen.)
Enable the Wi-Fi setting in the printer's settings screen.
C-3
No IP address is assigned. (You can also check that the item "3-2-12" in the printed network settings
information is blank.)
Check the following items.
483
does not appear on

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma g4070 series

Table of Contents