Configuration Overview - Xerox B1022 System Administrator Manual

Introduction

Configuration Overview

When you configure the printer for the first time, complete the following tasks.
1. Connect your printer to a network with an Ethernet cable.
2. Confirm that your network recognizes your printer. By default, the printer receives an IP address
from a DHCP server over a TCP/IP network. If you have a different type of network, or want to
assign a static IP address, refer to TCP/IP.
3. Complete the installation wizard that launches automatically the first time the printer powers on.
The installation wizard helps you configure basic printer settings such as your location, time zone,
and date and time preferences.
4. To view the new IP address and ensure that the connection is successful, print a Configuration
Report. For details, refer to
5. To access Xerox CentreWare
®
for your printer. Xerox
software installed on the embedded Web server in the printer. CentreWare
allows you to configure and administer the printer from a Web browser. For details, refer to
Accessing Xerox CentreWare
®
Note: You can access most configuration settings in Xerox
Services on the Properties tab.
6. Configure authentication. For details, refer to
7. Configure Security. For details, refer to Security.
8. Configure Print, Copy, and Scan features. For details, refer to Printing, Copying, and Scanning.
Note: Not all printer models support all features.
8 Xerox ® B1022 Multifunction Printer
System Administrator Guide
Printing the Configuration
Internet Services, open a Web browser, then type the IP address
®
® CentreWare ® Internet Services is the administration and configuration
Internet Services.
®
Report.
®
Setting Access Rights.
® Internet Services
CentreWare Internet
®