Fcc Compliance Statement - Lennox 22V26 Installation And Setup Manual

FCC Compliance Statement

PART 15.19 This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference
received, including interference that may
cause undesired operation. FCC Interference
Statement — PART 15.105 (B).
3. This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
4. This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiv-
er is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
RF Exposure Information
This device meets the FCC and ISED requirements
for RF exposure in public or uncontrolled environ-
ments.
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, includ-
ing interference that may cause undesired operation
of the device.
24