Table of Contents
Advertisement
w
1. Confirm that the desired smart room sensor
location has good signal strength.
2. Select wall location for sensor installation.
Minimum 5' (1.52 m)
3. Use the provided wall template along with a
field-provided leveler tool for proper horizontal
alignment on the wall before marking the
mounting holes.
NOTE: The distance between the to mounting
points is 3/4" (19mm).
4. Use the provided screws and wall anchors (for
drywall applications) if needed.
NOTE: Screw depth adjustments may be required
in order to accommodate a snug fit for the
sensor when attaching to the wall.
m
aLL
ounting
Minimum 6" (15.24 cm)
from corner
from oor
Insert wall anchors in hole until flush with wall.
3/4"
(19 mm)
u
s
sing
If the stand is used, then the smart room sensor
should be placed out of reach of children or pets.
Possible locations can include a book shelf or a desk.
Wall mounting the sensor is preferred to avoid poten-
tial loss of or damage to the smart room sensor.
Wireless Extender Installation
• Place the wireless extender mid-point if possible
between the thermostat and the furthest smart
room sensor.
15
r
s
s
mart
oom
ensor
tand
Advertisement
Table of Contents
