Smart Devices Thermostat Alert Codes
To access a more detailed description of the alert code, press the down arrow to expand the description.
• •
Service Urgent - Your system is in a No Heat/ No Cool or not operating condition. Dealer service
call is needed to get the system running
• •
Service Soon - System is not reaching set point or is partially operating. A Dealer will need to
service it with 24-48 hours
• •
Maintenance alerts are those intervals you put in the thermostat as reminders to change filters,
replace UV lamps, tune up systems.
• •
Information Only Dealer - System is operating normally. Collected thermostat data is accessible
to Dealer as system history.
Alert
Priority
ID
70501
Service Soon
Table 3. Thermostat Smart Devices Alert Codes
Message
Custom Sensor Name:
Internal Data Fault
Troubleshooting
Cycle power to the Smart Room
Sensor (see "Cycling Power for
Troubleshooting" on page 17 for
procedure).
20
Clear Condition
After power cycle, wait for ten
(10) minutes for self-clearing
to take place, if condition is
resolved for temperature and
relative humidity.
For occupancy sensor self-
clearing will take forty-five
(45) minutes.